插装式液控能源选择阀的设计与分析

针对液压系统油源的安全性及可靠性问题，提出油源冗余设计方法，即多油源供给多负载，当某一油源发生故障时能源选择阀切断故障油源，由其他油源给负载提供基本液压能源，系统能完成必须的服役性能。针对液压系统能源选择阀存在的频繁换向与振动问题，提出一种插装式液控能源选择阀，其先导阀采用锥阀和可变阻尼形式，主阀采用三台肩且终端有缓冲功能的滑阀。建立了插装式液控能源选择阀的数学模型，分析了能源选择阀在两种模拟故障下的切换压力及切换时间、油源压力脉动等特性。理论分析结果表明，油源压力阶跃和线性变化时，某能源选择阀切换时间分别为5 ms和7 ms。当压力发生波动时，主阀不会发生振动，还可通过液控先导阀结构设计来控制切换压力和回复压力大小。     

Application of a modified generalized sail model on a solar sail with wrinkles

In this paper, we present an analysis of effect of wrinkles on the solar sail performance. We describe different analytical, semi-analytical and numerical approaches to the calculation of general large-scale curvature of a solar sail as well as parameters of so-called wrinkled domains, and introduce the impact of such wrinkles on the thrust and torque of the solar sail. Finally, we present a model of an optically-orthotropic surface for such non-ideal sail, providing a connection with the Generalized Sail Model, and other solar sail thrust models.     

空间载荷机柜热控设计的仿真研究

空间站主动热控系统的作用是提供和保持航天员、仪器设备和结构部件所要求的温度、湿度和风速等热环境。本文以空间载荷机柜为热控系统的基本单元，建立了以单相流体循环回路为基础、采用液冷结合风冷的冷却方式的载荷机柜数学模型；介绍了模糊增量控制算法的工作原理；提出了采用模糊增量控制算法，以液冷支路进出口温差和风冷支路冷却量占总冷却量的比值为控制目标的反馈控制策略。同时文章采用数值模拟方法研究了控制系统的动态响应效果。仿真结果显示，模糊增量控制算法具有响应迅速、超调量小、无静态误差的特点，控制策略满足有效性、稳定性和高精确度的要求。     

Comparison of GPS derived TEC with the TEC predicted by IRI 2012 model in the southern Equatorial Ionization Anomaly crest within the Eastern Africa region

We have compared the TEC obtained from the IRI-2012 model with the GPS derived TEC data recorded within southern crest of the EIA in the Eastern Africa region using the monthly means of the 5 international quiet days for equinoxes and solstices months for the period of 2012 – 2013. GPS-derived TEC data have been obtained from the Africa array and IGS network of ground based dual-frequency GPS receivers from four stations (Kigali (1.95°S, 30.09°E; Geom. Lat. 11.63°S), Malindi (2.99°S, 40.19°E; Geom. Lat. 12.42°S), Mbarara (0.60°S, 30.74°E; Geom. Lat. 10.22°S) and Nairobi (1.22°S, 36.89°E; Geom. Lat. 10.69°S)) located within the EIA crest in this region. All the three options for topside Ne of IRI-2012 model and ABT-2009 for bottomside thickness have been used to compute the IRI TEC. Also URSI coefficients were considered in this study. These results are compared with the TEC estimated from GPS measurements. Correlation Coefficients between the two sets of data, the Root-Mean Square Errors (RMSE) of the IRI-TEC from the GPS-TEC, and the percentage RMSE of the IRI-TEC from the GPS-TEC have been computed. Our general results show that IRI-2012 model with all three options overestimates the GPS-TEC for all seasons and at all stations, and IRI-2001 overestimates GPS-TEC more compared with other options. IRI-Neq and IRI-01-corr are closely matching in most of the time. The observation also shows that, GPS TEC are underestimated by TEC from IRI model during noon hours, especially during equinoctial months. Further, GPS-TEC values and IRI-TEC values using all the three topside Ne options show very good correlation (above 0.8). On the other hand, the TEC using IRI-Neq and IRI-01- corr had smaller deviations from the GPS-TEC compared to the IRI-2001.     

考虑测试性设计缺陷修正延时的测试性增长模型建模与评价方法

针对现有测试性增长模型忽略了测试性设计缺陷的修正延时过程，进而导致测试性增长模型（TGM）跟踪与预计精度低的问题，提出了一种考虑测试性设计缺陷修正延时的测试性增长模型建模理论与方法。首先分析测试性设计缺陷识别与修正之间的延时机理，得到剩余测试性设计缺陷（TDL）具有先增后减的铃形变化趋势；在此基础上，分别以Gamma、Raleigh和Delay-S 3种曲线拟合剩余测试性设计缺陷（RTDL）变化趋势，研究建立基于以上3种曲线考虑修正延时的测试性增长模型；最后，以某机载稳定跟踪平台测试性增长试验数据验证测试性增长模型拟合、跟踪及预计效能。研究结果表明：基于该测试性增长试验数据，Gamma曲线可以精确地拟合剩余测试性设计缺陷变化规律，测试性增长模型跟踪和预计精度可达到10^-2数量级。     

Geometric error analysis of an over-constrained parallel tracking mechanism using the screw theory

This paper deals with geometric error modeling and sensitivity analysis of an overconstrained parallel tracking mechanism. The main contribution is the consideration of overconstrained features that are usually ignored in previous research. The reciprocal property between a motion and a force is applied to tackle this problem in the framework of the screw theory. First of all, a nominal kinematic model of the parallel tracking mechanism is formulated. On this basis, the actual twist of the moving platform is computed through the superposition of the joint twist and geometric errors. The actuation and constrained wrenches of each limb are applied to exclude the joint displacement. After eliminating repeated errors brought by the multiplication of wrenches, a geometric error model of the parallel tracking mechanism is built. Furthermore,two sensitivity indices are defined to select essential geometric errors for future kinematic calibration. Finally, the geometric error model with minimum geometric errors is verified by simulation with SolidWorks software. Two typical poses of the parallel tracking mechanism are selected, and the differences between simulation and calculation results are very small. The results confirm the correctness and accuracy of the geometric error modeling method for over-constrained parallel mechanisms.     

连续式风洞二喉道调节马赫数控制策略

为了降低连续式跨超声速风洞压力波动,提高马赫数稳定性,需要对二喉道调节马赫数控制方式进行研究,针对现有文献鲜少对该控制策略描述等问题,以0.6m连续式跨声速风洞为例,对二喉道控制马赫数的原理进行分析,基于运动控制器加伺服驱动器双PID(proportion-integral-derivative)控制模式实现二喉道位置精确控制,提出了二喉道和压缩机转速的组合控制流程,并采用分段变参数模糊PID加串级控制的算法实现马赫数精确控制,最后进行了试验验证。结果表明马赫数控制精度优于0.001,且每个马赫数极曲线(9个攻角阶梯)的时间可控制在4min以内,证明所提出的控制策略是有效的,可为连续式跨超声速风洞的设计调试提供参考。      

基于Kriging模型梯度解析解的改进一次二阶矩方法

改进一次二阶矩（AFOSM）法是一种基于功能函数梯度的结构可靠性分析方法，鉴于其对隐式函数的梯度较难求解，提出了一种基于Kriging模型梯度解析解的AFOSM方法，利用Kriging代理模型的解析表达式推导得到功能函数对输入变量的梯度解析解，为AFOSM中设计点的确定提供高精度的梯度信息。通过Kriging与AFOSM的结合，很好地解决了基于有限元模型的隐式情况下梯度计算量相当大、可靠性分析难的问题。数值与工程算例验证了所提Kriging梯度解析解的较高精确性，同时验证了所提基于Kriging解析解的AFOSM结构可靠性分析方法的正确性与较高精度。     

基于自适应Kriging代理模型的交叉熵重要抽样法

对于复杂失效域和小失效概率耦合的可靠性分析问题，本文提出了一种交叉熵重要抽样（CE-IS）方法结合自适应Kriging （AK）代理模型的求解方法（CE-IS-AK）。所提方法基于交叉熵原理，用混合高斯模型逐步逼近最优重要抽样密度函数，并采用AK模型协助逼近过程中混合高斯模型的参数的更新，从而提高了CE-IS方法的计算效率。另外，本文还改进了CE-IS方法的收敛准则，避免了方法的冗余迭代，扩大了方法的适用范围。由于在CE-IS方法中引入了AK模型，因此，本文方法所构建的重要抽样函数在保证精度的基础上提高了效率。相较于AK-MCS方法，本文方法中引入了重要抽样的思想，因此在Kriging训练点数目基本相同的情况下，大幅缩减小失效概率计算时样本池规模，并且由于利用了混合高斯模型，因而对多失效域具有较好的适用性。算例分析也证明了本文所提方法的优越性。     

期望状态序列导向的深空探测器规划修复方法

Aiming at the challenges caused by the persistence, concurrency and energy consumption of probe actions, a plan repair method of deep space probe based on the expected state sequence is proposed. In this method, the expected state sequence is formed of the expected effect of the unfinished action and the expected precondition of the unexecuted action in the pre designed plan, according to the execution status of the action. The expected state sequence is an ordered set of states with mixed logic and energy, providing subgoals for plan repair and also transforming the plan repair problem into the state transition path searching problem. During the search, the plan repair strategy with energy supply priority is proposed, which separates the logic repair from energy repair to reduce the difficulty of solving the problem. And this method enables the probe to recover from plan failure autonomously. Finally, the effectiveness and rationality of the proposed method are verified through simulation by taking the Mars Orbiter as an example.